AGA-OP-POWER-MAT MP-1050/5Y Operation Table


AGA-OP-POWER-MAT Operation Table

This model is based on the well-established multi-function table AGA-POWER-MAT. The AGA-OP-POWER MAT operation tables (Article No. MP-1050/5Y and MP-3050/5Y) differ from the AGA-POWER-MAT only in the height adjustment mechanism. The hydraulic height adjustment on the AGA-OP-POWER-MAT is done with a centrally located foot pump.  

  • Height adjustable via hydraulic system (foot pump)
  • Continuously adjustable headrest (-30°/+20°)
  • All upholstered parts can be manually adjusted
  • Lifting column made of anodised light alloy
  • Independent from an energy source
  • Quality made in Germany

100% secure payments




The detachable tabletop sections (thickness 64 mm) are made of soft polyurethane foam and upholstered with electrically conductive synthetic leather, colour black. 

The headrest is continuously adjustable (-30°/+20°) and secured with a clamping rod locking mechanism. 

Continuously adjustable back and leg sections, whereby the leg rests can be individually dropped down (-90°) with a gas spring mechanism.

Adjustment Ranges

Height 785 to 1085 mm

Headrest +20°/-30°

Backrest +45°/-20°

Trendelenburg 20°

Reverse Trendelenburg 8°

Seat section +40°/-10°

Leg sections 0°/-90°


Plastic-coated steel frame and plastic base cover - Article No. MP-1050/5Y.

Glass bead blasted stainless steel frame and stainless steel base cover - Article No. MP-3050/5Y.

Compartment for X-ray tape under the seat section, approx. 435x305 mm LxW, retrofitting is not possible - Article No. MP-RF.

Stainless steel tray , approx. 250x190x45 mm, retrofitting is not possible - Article No. VA-30/MP. 

Upholstered pads  thickness 40 mm, antistatic according to ISO 2882. The upper surfaces are seamless. Hooks and loops fasteners are located on the undersides to attach the pads to the 15 mm thick radiolucent support plates - Article No. MP-PAL.

Removable, split and vertically/laterally adjustable leg plates  instead of the standard leg sections which can only be dropped down 90° (Vertical adjustment: 0°/-90°, lateral adjustment/spread: 0°/90°) - Article No. MP-BTSA.

The AGA-OP-POWER-MAT is also available with an adjustable headrest by gas pressure spring  instead of headrest adjustment with clamping rod locking mechanism - Article No. KVG.

Non-conductive synthetic leather upholstery is also available for this operation table in other colours (see upholstery colours). In this case, the table will be a custom-made product which cannot be returned or exchanged.






On the outside of the leg, seat and back section frame, the standard rails (25 x 10 mm) allow the installation of various optional accessories: 

Arm supports, leg and hand cuffs, instrument table, body strap, anesthesia pole, side and shoulder supports, arm/hand operating table, side safety rails and leg supports.

The product descriptions and article numbers for the accessories can also be found under Operating Room Accessories and in the AGA catalogue on pages 14-19.

Also available for the AGA-OP-POWER-MAT operating table:

Paper roll holder - Article No. PU-2049

Central locking castor system - Article No. LR/Z-50 (Ø 50 mm).

Please note that these two optional accessories are not retrofittable.



10 Items

Specific References

20 other products in the same category:

Comments (0)
No customer reviews for the moment.